AquaBlox™ Water Matrix for the Pondless® Waterfall
Aquascape’s AquaBlox™ Water Matrix® is designed to replace up to 90% of the gravel
traditionally used in the reservoir of Pondless® Waterfalls applications. The AquaBlox™ Water
Matrix® can also be used to replace the lower layer of 4-6 inch boulders in the bottom of
Snorkel™ Vault and Centipede™ Module Wetland filter applications.
- Over 3 times more water storage capacity than gravel – The AquaBloxTM Water Matrix® can hold approximately 7.4 gallons of water per cubic foot. Gravel can hold approximately 2.2 gallons of water per cubic foot.
- Extra water storage capacity results in less routine maintenance toppingreservoir to compensate for evaporation.
- Easier to clean and less prone to clogging than traditional gravel basins.
- Smaller Reservoirs! The ability to hold more water per cubic foot allows for smaller reservoirs.
- Less labor excavating the basin, as well as less labor moving the many tons of gravel for basin.
- Uses less liner and geotextile underlayment.
#29491 AquaBloxTM Small Water Matrix® Size 26.5" L x 16"W x 9.5" H Unit Weight: 11 lbs.
#29492 AquaBloxTM Large Water Matrix® Soze 26.5"L x 16"W x 17.5" H Unit Weight: 16 lbs.
